I have an interesting senario... Just put new servo's, and swashplate on my BCP. When I went to set the head up, I see that even the new servo's have about 1/16" play in them, so I wound up having to adjust the swashplate height by making the link adjustments when holding the heli up by the swash as if it were hanging in the air by the blades and paddels. When I set the height by letting the swash rest down against the servo's and linkages, I didnt get enough lift to get it off the ground without excessive stick. My VNR3D has almost no slop in the servo's, swash and inkages, and the BCP has new stuff. What kind of nonsense is this ? Dennis