Hi all

I just noticed this thread so thought I would put my twopence worth in.

RCV have been producing engines now since 1997. The SP series started to be produced in 2000, whilst the 58CD came out in 2002 and the 91CD in early 2004. They are newer than some engines, however RCV do have a fair pedigree as the company is also involved in larger scale engine development. We also operate a continous improvement policy and with 100% individual engine testing now, issues are very rare.

I noticed the comment about a problem crown wheel etc. Originally in 2000 the RCV60SP were not helical cut and we changed this in about 2001. The reason for this change was to reduce noise, there was never an issue with gear failure. We have no engineer we are working with in Australia (so I would be interested Woody, if you could pass this on to your contact). The only thing I can possibly think is that in 2002 we recalled 1 batch of 60SPs as the flame hardening treatment failed. The engines were recalled, replaced and I can confidently say we have no other issues.

I hope this clears things up.

Best regards
Laurenne