I'm not afraid to put them anywhere. If something is going to fail, it's just going to fail.

But on this application, you have two 250 ounce servos with each their own push rod, angled at one control horn.

When I receeived the airplane and put my amp meter on it, the reading was 3.5 amps at idle.

I shut everything down and started investigating.

No matter how you measure the rods etc. You can't line up two digital servos that accurately.

Well, maybe you can, but I can't.

Matchbox saved it for us.

Works great!

I've had four jets with a matchbox on a primary flight surface, but you know me, I fly JR, I'm such an 'outlaw'