RCU Forums - View Single Post - U Can Do 3D
Thread: U Can Do 3D
View Single Post
Old 04-12-2006 | 07:51 PM
  #2978  
fliggyg
Member
 
Joined: Nov 2003
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
From: albertville, AL
Default RE: U Can Do 3D

I maidened my UCD today.... It flew beautifully....... Very minimum clicks out of trim.. I used the recomended throws for high and low rates .. The CG is at 4 7/8" (also recomended).... I LOVE THE WAY THIS PLANE FLIES.... the biggest problem with it is getting use to a "Floater".. I am use to my cap and other sport planes... I flew twice.. both times had to take a couple fly by's to get the approach right.... however I greaes both landings...... I hovered a little.... the saito 125 is awsome in this plane!!!!! I can pull straight out the top while hovering with less than 3/4 throttle..... never even touched 1/2 throttle during normal flight.... I slowed the plane to a crwl (high altitudes) to see if I couyld get it to stall.. Very difficlt to stall this plane..

I have lots to learn concerning flying this type of plane.. Bu eager and willing to learn....