RCU Forums - View Single Post - Chasing the needle
Thread: Chasing the needle
View Single Post
Old 04-15-2006 | 04:12 PM
  #13  
loughbd
Banned
 
Joined: Nov 2003
Posts: 2,110
Likes: 0
Received 1 Like on 1 Post
From: Bremerton, WA
Default RE: Chasing the needle
Go ahead and run it at 18,000. You can get new rods from RPM or Tower. The OS 28 uses the same rod. So did the magnum 28. The 25's used the same rod. Of course when it goes it will probably take the piston with it
loughbd is offline  
Reply Like