It's a little late to move the servo(s) to the stab, although it could be done. I went to the trouble of installing Troy's elevator system (to save wieght!) and, by gosh, I'm going to use it! I'll use stick-on weights in case I decide to change it later. The plane will still be quite light, I think. If I decide to change, it would probably be easier to build new stabs and elevators and place the servos per the plan. I made mine with adjustors so they are removable.

I've heard of the wing mods and considered them. In fact, the plane that Ken Velez built had them. Since I'm just going into the intermediate class, I'm not too worried about this yet.

I just completed building a test stand for the Webra. I'll post a pic later.