RCU Forums - View Single Post - first real attempt at 3d
Thread: first real attempt at 3d
View Single Post
Old 04-22-2006 | 08:48 AM
  #5  
Walt and Sage's Avatar
Walt and Sage
Senior Member
 
Joined: Dec 2003
Posts: 817
Likes: 0
Received 0 Likes on 0 Posts
From: Ellensburg, WA
Default RE: first real attempt at 3d


It sounds like the LOW end adjustment is off...
TO LEAN or TO RICH...
That adjustment is made on the side of the carb...
Try 1/8th one way then 1/8 the other...
Walt and Sage is offline  
Reply Like