Life in general has gotten back to a busy but less chaotic pace... time to get back to this build.

Got the fairing blocks temporarily mounted to shape...


This applicator tip went a long way in helping me apply small drops of CA so the blocks were secure for the shaping but easily removed afterwards.




Sanded the turtledeck sheeting...


Got all the cracks and uneven surfaces puttied up for the primary final fuselage sanding before mounting the stab and fin. I built the upper surface of the fuselage from the canopy area to the firewall level to change the profile a bit vs sloped.


Letting the putty dry overnight to assure I don't hit any soft spots when I sand.


Nice to be making some dust again.

somegeek