Ok, yesterday I did the break in of the motor but then today, I get the thing running for a few second with the glow igniter on top and then take it off and sometimes it stays running. If I give it gas it speeds the tires up and then when I let off the gas it gives it a little more. Then if I try to hit the brakes to idle the motor it stalls out. Now when the motor starts the wheels keep spinning. I adjusted all necessary needles and still can't get it right but yesterday it was fine. I also checked the glow plug and it lights up when I take it out and connect it to the igniter. I'm about to scrap this thing real soon if I don't get it running right. I'm willing to send it to one of you guyz and pay you to get it running right.[:@]