Appreciate it, Mike. [8D]

Using a Futaba 6EAXP.

Single switch for dual rates on my controller.

Stock recommended control surface travel per build manual:
Elevator - 9/16" up and 9/16" down
Rudder - 1" left and 1" right
Aileron -3/8" up and 3/8" down

Max throws when dual rate switch is thrown currently:
Elevator - 1" up and 1" down
Rudder - 1.25" left and 1.25" right
Aileron - 5/8" up and 5/8" down

All control horns and rods were adjusted and verified no bending or binding at max throws.

somegeek