I wanna say thanks to Newguy 1980 for the diff write up. It seems like a crazy way to adjust things but untill I tried it I was never going to have everything tight enough. I rebuilt a diff with the Duratrax rebuild kit and for the life of me I couldnt figure out what I was doing wrong. I kept assuming that if anything I was tightening everything up too much but when Id run the vader everything would be slipping and it wouild be making that awfull sound. I did what the write up says and finally Im back up and running. That and the motors Raz sent me anyway. Thanks again Raz
Oh yeah I kind of agree with flyojumper on the b2 parts. They seem to be a little off spec. The rings are too big and at least for me the B2 diff gear wouldn,t fit at all. (diff gear 2.40:1 B3/B2/T3 Part #9365) The whole through the center is way smaller than the duratrax nylon diff gear. I wondered if I wasn,t supposed to grind it out but wouldn,t it have to be perfectly round?