RCU Forums - View Single Post - U-Can-Do 3d 46?
View Single Post
Old 07-04-2006 | 11:48 PM
  #4833  
rclement's Avatar
rclement
Senior Member
My Feedback: (1)
 
Joined: Mar 2004
Posts: 2,690
Likes: 0
Received 0 Likes on 0 Posts
From: Auburn, WA
Default RE: U-Can-Do 3d 46?

rtn9105, Sorry for your loss. What a shame to see a U Can Do in a pile like that. Yikes!
I've never taped my crystals in since I usually put foam rubber around them. Again, sorry for your loss.

I had a loss today too. I went to maiden the Mayhem today and it crashed. Not too bad though but enough to really bum me out. What happened was that I took off and banked to the left and when I got to the other side of the flying area it started glitching like crazy and I didn't have as much control. I managed to swing it back towards the runway and before I could set up to land it started glitching again and banked over hit the ground. It was kind of at an angle and the grass out there was about 3 ft. tall so that softened it some. The crash broke up the cowl some and caved in the top of the fuse aft of the cowl. It's fixable, except for the cowl. I did a range check when I brought it in and it glitched badly. The bad thing is that I didn't do a range check before I flew it. I think the reason for that is that there was so many things going on at the field and people asking me when I was going to fly it that I just got too distracted and rushed. When I got home tonight I pulled the crystal and put one in from the U Can Do and it still glitched. Then I attatched new RX from another plane and set it up the same way as the first one and it works fine now. So I think that the Futaba RX that I got from Tower is junk. I'll have to check tomorrow and see what they can do.