The exact numbers evade me presently, I'll take a look at my inventory and see if I have these parts in stock. I will then be able to provide the specific part numbers. This is a maybe...

Rocket City 6-32 hardware with 4-40 clevis's and ball links on all elevator and ailerons. These are offered with and without offset, you need to have the offset.

Rocket City 6/32 hardware with 4-40 ball links and clevis's for pull-pull rudder, again these are offered with and without offset, you need to have the offset. A 4"x 6/32 stud was used with Nelson cable and cable ends. The 4" stud was obtained from a hardware store.

Take a look at my website for some ideas and the method I used to install the Rocket City hardware.

http://mglavin.com/Extra330lreview.html

My Extra has held up very well, thus far. It's even survived a severe imapct with mother earth, been repaired and still flying today. See's routine 3D abuse. Is there any other kind of flying?