i just put my boat (miss vegas)back together yesterday took everthing out. when i went out to test it today everything was great except when it came down to the steering. when i took it apart i disconnected the white (coupler?) off of the turn fin. i don't know what is going on could i have reconnected it wrong.(anyone have a picture of theres) also would it be possible for the propeller to affect the steering say if i pushed it in to far.(if anyone has a picture of the proper propeller set up please post it) it is a stock propeller. the boat will not make sharp turns it only makes slow gradual turns under speed. if it is barely moving it seems to work better. thanks Rob[sm=confused.gif]