Apparently some changes were made to the taxi route.

Route altered before crash
BY JEFFREY MCMURRAY | ASSOCIATED PRESS WRITER
LEXINGTON, Ky. (AP) -- The taxiway at Lexington's airport was altered during a repaving project just a week before a Comair jet tried to take off on the wrong runway and crashed, killing 49 people, the airport's director said Monday.

Federal investigators said they were looking at such things as lights, markings and signs that may have confused the pilots, but at a midday briefing they did not specifically mention the repaving project.

Both the old and new taxiway routes cross over the short runway where Flight 5191 tried to take off before crashing into a grassy field and bursting into flame, Airport Executive Director Michael Gobb told The Associated Press.


The repaving was finished one week before the crash, Gobb said.

"It's slightly different than it used to be," said Charlie Monette, president of Aero-Tech flight school at the airport. "Could there have been some confusion associated with that? That's certainly a possibility."

It was unclear whether the Comair pilots had been to the airport since the changes to the taxi route.

Lowell Wiley, a flight instructor who flies almost every day out Lexington, said in an interview that he was confused by the redirected taxi route when he was with a student Friday taking off from the main runway.

"When we taxied out, we did not expect to see a barrier strung across the old taxiway," Wiley said. "It was a total surprise."

Investigators planned to use a high truck to simulate the pilots' view of the runways and taxiways in their efforts to determine why the jet turned onto a shorter runway before dawn Sunday. The lone survivor was a critically injured co-pilot who was pulled from the cracked cockpit.

Authorities also planned to prepare a full report on the pilots, including what they did on and off duty for several days before the crash, which was the worst U.S. plane disaster since 2001.

All discussions between the plane and the control tower were about a takeoff from the main strip, Runway 22, which is 7,000 feet long, National Transportation Safety Board member Debbie Hersman.

Somehow, the commuter jet ended up on Runway 26 instead - a cracked surface about 3,500 feet long that forms an X with the main runway and is meant only for small planes. Aviation experts say the CRJ-100 would have needed 5,000 feet to get airborne.

According to the NTSB database, there have been four accidents caused by pilots taking off on the wrong runway worldwide since 1982.

"It's not common," Bill Waldock, aviation safety professor at Embry-Riddle Aeronautical University in Arizona. "It's right up there with lightning strikes."

Air traffic controllers are not responsible for making sure pilots are on the right runway, said John Nance, a pilot and aviation analyst.

"You clear him for takeoff and that's the end of it," Nance said. "It's not the duty of the controller to baby-sit every flight. It would have been great if he or she had, but they have other duties up there."

According to a NASA database, a twin-engine jet taxied to the wrong runway at Lexington in November 1993 and the tower called to tell them about their mistake. The pilot reported that the confusing runway intersection contributed to the incident.

The NTSB will re-create the pilots' last 72 hours, focusing on fatigue and stress issues, Waldock said. Agents will review how many flights the pilots made, how much rest they had, any medication they took and even whether they had coffee that morning.

Hersman said the NTSB has interviewed the lone controller on duty at the time, reviewed records and transcribed the data and voice recorders. She said information retrieved from the cockpit voice recorder indicates that the preflight preparations had been "consistent with normal operations."