Gp, for winglets on the mono mod, I used the lower wings. I cut them at the same angle as the upper wing and 1 1/4 inches out from the airframe. I think the overall measurement was 1 1/2 inches. I've posted pic's of this mod before, but I'll repost them.

Suzonka, I'll post a pic of the stir stick mod as well. I like the stir stick better that the toothpick, because it seems to work better, and supports the wing farther out. Tubes have more inherent strength than solids, and by using two tubes I can better balance the weight.

I'll post one pic of each, if you need more pic's let me know. Tim