Mine is running perfect (Evolution 45GX2). LED wire and choke servo attached.
Starts within a few flips. Just turn it on, idle throttle and flip until it starts. No full throttle choking and popping/dying, once it pops, it runs [8D]
Not really fair to make a poll like this, since people reading this thread are likely to read it because they do have problems and hence will be overrepresented, compared to the happy users not reading this thread because they don't have a problem.
ORIGINAL: Ih82crash
Incidentally, a friend and I both had to turn our high speed needles out almost a full turn to get the ignition to throttle up.
Ignition and carburetion are not related- Maybe the problem is your needles are set wrong, and that is why you are having problems running the engine. Reset them to factory default and try again