Doctorgo

The contour on the saddle cutout is already a match to the top of the wing. My problem is the contour is not deep enough into the fuselage to allow the trailing edge of the wing to fully seat into the saddle and make it flush. I didn't mean that the trailing edge didn't make it to the saddle, I meant that it just didn't seat deep enough into the saddle to be flush with the bottom of the fuselage.

For power I plan on using a Super Tiger 90 mounted sideways with a Pitts going out of the bottom.

Thanks for the tip on the aileron control rods, I'll take care of them.