RCU Forums - View Single Post - BSD Micro RC
Thread: BSD Micro RC
View Single Post
Old 10-11-2006 | 06:30 PM
  #2  
micro_builder's Avatar
micro_builder
Senior Member
My Feedback: (1)
 
Joined: Oct 2005
Posts: 1,241
Likes: 0
Received 0 Likes on 0 Posts
From: Fort Worth, TX
Default RE: BSD Micro RC

BSD is one of the best venders to order from, they're quick on replys and always helpful, shipping is usually quick too. i've been ordering from them for a couple years and they've never done me wrong - i think just about anyone else who's orderd from them would say the same.

the amount of area you'll be flying in will decide the size and weight of the plane you'll need. if you're wanting to fly in a slightly larger area than your house, i posted some info here: http://www.rcuniverse.com/forum/m_4851893/tm.htm if you're wanting to fly in your house, you'll either need to buy lighter electronics or have a larger wing to keep the speed slow enough. just about any 2 channel system will work fine for flying in a gym or living room, with just the throttle and rudder. all of the RX's that are on BSD's site are 3 channel, they're also fully proportional to give more presice control.

a cheap and easy way to get into flying in your house is to buy an Aero Soarer. there's a thread for it somewhere on this forum, not sure if they're being sold in the US, but you can find them on some sites and on Ebay. the plane is powered with a capacitor so flight times are only 30 seconds or so, but the electronics are perfect for making your own indoor flyer (i'm working on one right now, its pleanty slow).

let us know how big of an area you have to fly in, and you can get more info and the best plane to fit the flying area.

nick