RCU Forums - View Single Post - Piper Arrow 2
Thread: Piper Arrow 2
View Single Post
Old 01-25-2003 | 04:17 PM
  #10  
Rich Firestine
Junior Member
 
Joined: Jan 2002
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
From: Central,N.J.
Default Aviomodel arrow

I built this plane and it was partialy covered and painted. I built it a little heavy because of wing mounting changesand nose gear beef up. I used an OS 120 and dual battery backer system. Total weight was al;most 17 lbs .It flew like it was on rails, and did nice crisp rolls, etc. It was not to bad a kit to build,with laser cut parts etc.I made a "dumb thumb" move low and it caught a wingtip and after 4 cartwheels itwent back to kit form. I would build another one if I could find one. I am also flying an Aviomodel Cardinal, with an OS 120, and it flys even better than the Arrow. I have a backup kit for the Cardinal. In any case a good flyer. Rich