RCU Forums - View Single Post - Setup for Spectrum DX6 and Blade CP Pro
Old 10-19-2006 | 06:28 PM
  #28  
CPPROMAN
Junior Member
 
Joined: Oct 2006
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
From: Madoc, ON, CANADA
Default RE: Setup for Spectrum DX6 and Blade CP Pro

My Chopper has nver seen the repair hangar as yeT

I tried the setup as you posted Heli H.. but with my ship the head speed was low compared to stock transmitter therefore I felt the ship a litle unsteady.. Again I quess it is all in each individual heli..

With the setup from Horizon,, I incorporated -50% travel on the pitch ( I have a habit of reducing left stick in a hurry when in trouble ) the only other adjustment was about 6 points of aileron trim.. With those settings if I snap the throttle/pitch to about 60% the chopper will hover hands off for a short time before correction..

Not pickin just helpin (I hope)


Keith