RCU Forums - View Single Post - Saito .72 problems
View Single Post
Old 02-07-2002 | 12:00 AM
  #3  
Birddog-RCU
My Feedback: (62)
 
Joined: Jan 2002
Posts: 1,171
Received 0 Likes on 0 Posts
From: Saratoga Springs, UT
Default Low Speed needle adjustment

Pilot_Error,

I think you are right. 5 turns is way to rich and it just bogged down with that setting anyway. I brought it in about 2 turns and it started running fine except when I brought it down to idle. Maybe I'm just expecting it to idle slower that it can and I have the idle screw to low. But dang if it doesn't produce too much thrust at idle!