Hi all, newbie here, and the older I get the smarter I was... My son just got into this hobby also, he bought a "Futaba SkySport 4 model T4VF" and is building an
RC airplane, the reason for the FS One. We connected it to the USB interface and looked for a listing in the tansmitter area and couldn't find it listed. We then decided on the Alpha 40 other controllers from there we selected the "Alternate Alpha 40" and calibrated it as such. Tried flying the Alpha 40 and could not control it. Did notice that the Primary control inputs listed we pretty much the same as the listing for the "Tac Con" . We calibrated the Tac Con for the Alpha 40 and it worked all ok. Did we select the proper controller calibration setup for the Fataba. If not can you pse point us in the righr direction ... Thanks Manny