RCU Forums - View Single Post - Mounting 2 stroke inverted: help
View Single Post
Old 10-31-2006 | 03:55 PM
  #5  
AKFireMedic's Avatar
AKFireMedic
Senior Member
My Feedback: (2)
 
Joined: Feb 2004
Posts: 808
Likes: 0
Received 0 Likes on 0 Posts
From: Anchorage, AK
Default RE: Mounting 2 stroke inverted: help

The bottom line is that the engine really doesn't care what position it is in. It will run the same in all positions. The catch is that if the spray bar of the carb is too much below the centerline of the tank when it's on the bench the fuel will siphon into the carb and thus into the engine possibly locking it or flooding it at the least.