Thanks for the link. I've been reading ]RADD's[/color] and found it very helpfull.

I also went and purchased a few aluminum up grades. Not sure if it was a good idea to get all of them. I bought an aluminum swash plate, aluminum lower rotor head set and an inner shaft with aluminum head/hub. I think the aluminum head will not allow the flybar to pop off when it crashes. This means the flybar will be breaking alot :-/

I shoulda prolly stuck with the stock inner shaft and head. The other two upgrades I like though. Together they all look real sweet though :-)


edit: I forgot to plug the good people at www.myrcsupply.com
They got pretty decent prices and are good folks to deal with in general [sm=thumbup.gif]