Hey everyone!! I recently acquired a Great planes U-Can-Do 3D .60 size plane. This will be my first plane to set up for 3D flying. It came with a super tigre g90 2-stroke but it did not have the power to pull straight out of a hover. |It will hover it but it won't pull straight out it just falls out of the hover. |I have been researching on what engine to install in this plane for good 3D performance. |I have it narrowed down to 3 possible choices to give me the power I think it should have and still keep the nose some what light.
I was thinking about the new O.S. AX 1.20 2-stroke, the Saito 1.00 4-stroke or the new Saito 1.25 4-stroke. |The saito 1.25 is a little on the pricey side and if I thought I could get a smaller 4-S such as the 1.00 and still get great power I would rather save the $$$.
|I am sure the O.S. AX 1.20 would also make plenty of power and from every thing I have read they are great 3D engines. Any body who has the U-Can-Do .60 please let me know what you are running on it and how it performs. Any input would be appreciated.

Thanks
Map