Help! I've very recently attached a pull-start to my MT2 RTR, instead of the roto-start (which I really disliked). I tried to start the car for the first time today since I installed the pull-start, but it keeps locking up.
With the glow plug off, the pull start works as it should, but when I attach the glow plug it just locks up. Now I checked whether the engine was flooded, by pulling off the glow plug and giving the engine a few kicks with the pull-start, but when I replace the glow plug, it still locks. It's frustrating me a bit now as I don't know what the problem is. Any help would be much appreciated.