Ok I've got the 110 mounted on my Big Boy and ran it this evening. It started like a champ and from 1/4 to 12 throttle it transitions great, but from an idle it's slow to get up to speed. Granted, I didn't check rpms yet and it seems to be idling too slow. I'm thinking it's the low speed needle needing adjustment. From full T I bring it back to idle "bam" and it idles fine but in a few seconds it starts to slow down to a putter. I tried to use my trim to up the idle but it doesn't seem to have any effect. That may be a servo setting issue. I'm excited anyway because this thing has some major power and I'm positive it will have more than the G26 I had on it. I did back out on the low speed needle some,,,, maybe I'll get anothe chance tomorrow.