Originally posted by carkrazy01
I JUST NOTICED THAT THE TAIL ASSEMBLY IS 1/8 TO 1/4 INCH LOWER ON ONE SIDE AND IT IS EPOXIED 0N WILL THIS HURT ANYTHING.
Acutually, this may be the best thing that ever happened to you if you intend to continue building.
I did the same thing with my 1st plane, LT-25 it flew fine, but, the longer I had it, the worse it looked.
Now, the tailfeathers on every plane I build, get extra special attention to the point of building custom jigs for every plane and have never had another out of whack tail since.