Don't worry, Rob, I'm not about to give it up. I did one many years ago from an article in RCM magazine and it worked fine on a Saito 120. I did the winding on the bobine then and I'll do it now. I only feel like doing it once if it is possible. :-) I will now do two boards for two Quadra 35 that I have and maybe a new one for the Saito and for sure the timing board for all of them. I can see that I might run into some problem with the excel sheet but I'll cross that bridge when I'll get there. Right now I'm in the process of ordering the stuff in the States so that a friend can bring it on the 11th of January. I have lots of time here on my Caribbean island. It's every day vacation and almost every day flying, or in your case boating, weather. :-)

Yoram