GP Rimfire and GP Esc wires don't connect
I have been flying nitro for 2 years, and I just bought my first electric plane (GP Reactor)last week and purchased a 35 30 1250 rimfire and the recommended esc for that motor, a 35 amp GP esc. The male bullet on the motor is bigger than the female connector on the esc. Has anyone else run int this problem? I'm not sure what size connector is on each, but according to GP website the connectors should both be 3.5mm. I looked on tower and they sell an adaptor, but its for a 3.5mm motor wire to a 4mm esc wire. My problem is the other way around.
Grayle