RCU Forums - View Single Post - aeroace mods
Thread: aeroace mods
View Single Post
Old 01-29-2007 | 07:13 PM
  #11  
Cobalt Saber's Avatar
Cobalt Saber
Senior Member
 
Joined: Oct 2005
Posts: 344
Likes: 0
Received 0 Likes on 0 Posts
From: Rancho Cordova, CA
Default RE: aeroace mods


ORIGINAL: FERNDALE AIR FORCE

Here are pics of my latest aero mods. These are based on the mono mod. To remove the lower wings start at either the front or back and slowly peel the wing off. It is held in place by soft glue. With the lower wing removed you'll find that the plane is faster, but less responsive. It will float it flight. In these pics I have taken plastic stir straws and anchored the wing to the body more securely. This is a somewhat harder plane to fly. For the mod with only 2 stir sticks the length of the stir stick is 3.25". For the double stir stick the lengths are 3 3/8 and 3 7/16 approx. The goal is to maintain the original wing angle. These planes are far more responsive than the bipe or the plain mono mod.

I tried this mod, it fell out of the sky

I could not get 5 feet off the ground...