Really soon we can close the tail and get to the front end of the airplane. For those of you waiting for the motor mounting steps, soon...soon. We will be using honeycomb carbon firewalls and servo trays. Also coming up is belly pan mounting. There must be about one hundred ways of mounting belly pans and we use several methods. Hopefully, I can journey to our painter in Brussels and shoot some photos there, and also to our coverer. Then lastly we will rig and set up our airplanes and ship the others off to our customers to rig and setup. I hope to get these out of here and into the paint shop within two weeks.

Between now and then, we have the elevator driver from MK to install, elevators and ailerons and control horn mounting plates, and we are going to need a rudder too. There will be hinging to do and more shaping and beveling.

As we get to the last stages, I will show you some of the technology that we use to make these airplanes look as good as they fly. So, please stay tuned to the ZN Factory.

Thanks for all the kind words and great response on this thread. Your enthusiasm keeps us fueled for the next step.

Sincerely,
Mark Novack
US Army
ZNLine