Hey, thought I would throw out one last ditch question before I just buy a new gyro.
I have a G001 on my W36. I have tried just about every setting as far as sensitivity and AVCS/noAVCS. keep in mind I got this heli used but in good shape, don't know if the gyro was in a bad crash or not.
When hovering, left turns are great. If I hold 1/2 left stick, the heli will piro to the left until I let go. Real nice. When just making a left turn, the input is nice and responsive, and the gyro seems to work great.
Right turns are a disaster. If I am hovering and I give it 1/2 right tail rotor stick, it will turn to the right about 90 degrees then stay there. If I give it more stick it will turn more, but again stop. When I let go of the stick, the heli snaps back to the left about 1/2 way between where it started and where I was holding it.
Any ideas, PLEASE?
Here's a video of me flying it, you can kind of see what is happening. Left turns happen very nicely, whereas right turns don't quite make it all the way around.
http://www.youtube.com/watch?v=ILXAb4bKNow