RCU Forums - View Single Post - evolution .46 still cutting out
Thread: evolution .46 still cutting out
View Single Post
Old 02-06-2007 | 07:56 PM
  #18  
pirogue
Member
My Feedback: (1)
 
Joined: Feb 2004
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
From: lafitte, LA
Default RE: evolution .46 still cutting out
ORIGINAL: TheSuper

I had the same problem with my Evolutions .46. The first day was fine. But the next day it kept cutting out 2-3 minutes into flight. On the ground no problems after running for 2-3 minutes. I ended up ritchening it about 4 clicks and the problem when away. Contitions of flying site: I fly in Utah and it was a cold day and the elevation is 5000 ft. I also took the damperner out of the muffler just to see if it would help, at 5000ft we need all the power we can get.

Mike
just what super said. i dont have the 46 but i do have the pts and it normally needs richening for flight compared to ground setting's. don't know if all engines are like this or just evolutions.
pirogue is offline  
Reply Like