RCU Forums - View Single Post - axe cp thread
View Single Post
Old 02-08-2007 | 06:41 PM
  #125  
dfalcon
Senior Member
My Feedback: (76)
 
Joined: Oct 2004
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts
From: Wolf Point, MT
Default RE: axe cp thread

ORIGINAL: wildchild45177

I just bought a 9-C and thought I would try something. So, I bought a short crystal on the right channel, put it in, and guess what, it works. So now I can fly my AXE with my 9-C.
Still have to do some fine tuning, but I did get everything working right. This will be great, because now I can introduce a little expo, which I think will help me. If anyone is interested, let me know and I will post the radio settings to get everything moving right. Once I get the fine tuning done I will post that also.

Bob
I've been using my 9C for a little over a month now, and expo has done more for me than anything else. Another handy feature is the throttle hold; I don't know if I'll ever use it for autorotations, but it sure is nice to be able to cut the throttle while you're working on it without worrying about bumping the throttle stick. Having 3 idle-up modes might also come in handy later when I'm ready for it.