Post 2

Pic 1 shows the Wren 44 Gold and the alignment spacer I have made.
Pic 2 shows the spacer and dims.
Pic 3 shows how the spacer 'plugs' into the tailpipe, self-aligning.
Pic 4 shows the glue I am using for the engine mount plates. Great stuff from Colchester models. Seems to glue anything to anything!
Pic 5 1st engine plate fitted with fuel cell in place to get a good position.
Pic 6 both plates in place with both tanks.

The tanks can be removed afterwards.

Well it is moving on now and I may (only may) have it ready to fly this weekend, but we shall see

See you tomorrow

Paul