[:@] To all you guys that are wondering where the after flight photos are!! Let me say that I suffered a loss of the crystal in my JR receiver after a few loops rolls etc. The result wasn't pretty. I really was not that wild about the plane so it's no great loss. Besides they are still available. I have always preferred to build my own planes and fly tail draggers ( except during the old days when I used tri-gear retracts). If I did buy another one I would make the following changes: I would locate the elevator servos in the rear. I would make it a taildragger, I would strip the covering off the bottom wing and make it really visible to tell top from bottom. There isn't a hell of a lot of room to do a proper installation in the servo bay area. There are pre-glued servo bays which I found to be more of a hindrence than help. But for a few hundred bucks it ain't bad. I'm sure the right pilot can win with it. These are just my opinions and you may not necessarily agree with me. That's OK.