RCU Forums - View Single Post - axe cp thread
View Single Post
Old 03-01-2007 | 03:11 AM
  #211  
Rotor13B
Senior Member
 
Joined: May 2003
Posts: 253
Likes: 0
Received 0 Likes on 0 Posts
From: Co
Default RE: axe cp thread

ORIGINAL: strtykrincognito


Thanks for the link, I just blew through the order for a TP1320 and a THP205 balancer. (x-posted a note about that in the other thread)

Hopefully I don't need anything else to get these buggers humming in my Axe.

I'm going to pace the floor now.

TTFN.
I purchased a 1000mah battery, A balance charger with 12volt clips and a AC wall pluggin So you can charge in the house. The 12 volt battery clips unplug and then you can plug in the wall power pack. Just a scratch over 40 bucks for the complete combo. It's a cheap way to experience lipo power without putting up the big bucks. So far the combo has worked flawlessly and gives a substantial increase in run time and power. I'm waiting for them to restock batteries because at 16.99 a pack, It's a pretty good bargain.