RCU Forums - View Single Post - axe cp thread
View Single Post
Old 03-12-2007 | 08:34 PM
  #465  
Rotor13B
Senior Member
 
Joined: May 2003
Posts: 253
Likes: 0
Received 0 Likes on 0 Posts
From: Co
Default RE: axe cp thread


ORIGINAL: markind

Cool! What do you mean by 'playing cqb airsoft'?

TRACKING QUESTION!


Need a little direction for getting the tracking right.

I am bummed! I had it PERFECT before the crash, and now, its pretty close, BUT...

I have it now so that the 'red' blade is about 1/8" above the 'white' blade at hover. I notice the tracking changes slightly depeding on what the heli is doing... Sometimes, its perfect... but at the hover, its about one blade thickness off.

If I set that adjustment just a half turn up, the Red blade tracks a FULL INCH below the White blade!! Why such a drastic change?

Any general tips on getting tracking 'just right'?

thanks!
Check for slop in your linkages and feather shaft. This is usually why that happens.