RCU Forums - View Single Post - axe cp thread
View Single Post
Old 03-22-2007 | 08:38 AM
  #550  
chaseman81's Avatar
chaseman81
Senior Member
 
Joined: Jul 2006
Posts: 222
Likes: 0
Received 0 Likes on 0 Posts
From: Linden, MI
Default RE: axe cp thread

The Axe has a stablizing gyro not a HH-gryo. I would use the trims on the radio and not mess with the pots on the e-board. It is test flown at the factory and set to preform.

I have read of many people that change the settings and have much trouble getting it right again. I have flown mine from the start with stock everything except the battery. it is a nice flying heli.

I know my crash the other day was me being to fast and not taking my time. I was practicing side in hover and a gust of wind blow me back tail frist into the ground. Main blades, blade grip, tail motor mount. I had a blade grip from the last crash. $29 and change tower. I think the blades are a little pricy and S&H was 3.99 So $25 was just blades and S&H.

In two crashes two sets of mains, two tail motor mounts, two tail blades, one fly bar, and a main gear.

I think that says allot about this little heli for toughness....[>:]