After getting my heli's head speed to around 2800 it's tracking ok. It's not going to be perfect, but dang close.

I found that it's easier to find the tracking point when the pitch is just about 1 deg positive, they really track well if you have it set right.

BLADES: I went through 3 sets of blades the third set were some 325mm pro wood blades from Align. They balanced out perfectly without adding tape. The stock set were too far out of balance and the Helimax CF blades were also too far out of balance to get them right.

If you have alot of tape on one of your blades think about getting some new ones.