RCU Forums - View Single Post - nitro force engine
View Single Post
Old 03-30-2007 | 08:18 PM
  #10  
Skydive2144
Member
 
Joined: Mar 2007
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
From: storrs, CT
Default RE: nitro force engine

Ok, i am starting to get frusterated with this whole nitro thing. I love the car when its running but every time it starts running its something new. I cleared out the fuel from the engine and it started right up perfectly. as soon as i hit the throttle it stalled. started it up again, touched the throttle and it stalled. so i started it again and let it warm up for about a minute and it took off fine. about halfway through the tank it stalled out again. finally got it started drove it a little then it stalled again. with less then 1/4 tank left it stalled and the only way it would start is it the throttle was open a little bit, then as soon as i was not giving it any throttle it would stall out. i need some help with this.