I need some help resetting a Align ESC. It's the model that comes with the se v2, RCE-BLX 35A. It's been working great and flying fine, but I was in a hurry this evening to fly when I got home from work. I had the throttle bumped up when I powered the heli up. It beeped and went into program mode. Since I didn't have the manual to program it, I unpluged the battery. Now when I power it up it doesn't do anything. I have the manual now but can't get it back in program mode or anything. When I power it up I get the first beep and it powers the reciever so all the servos work but not the motor. Thanks!