RCU Forums - View Single Post - axe cp thread
View Single Post
Old 04-06-2007 | 12:14 AM
  #656  
markind's Avatar
markind
 
Joined: Nov 2006
Posts: 459
Received 0 Likes on 0 Posts
From: San Jose, CA
Default RE: axe cp thread

BOOYAH!!

I flew out a couple packs, and she was wanting to buck me off like a bronco a bit,

but after a few tweaks, got into a pretty stable hover in the large clubhouse.

I dropped down hard a couple times, SLAP! Probably due to these sudden losses of lift we have been chatting about. I think I caught a nasty downdraft at least once.

I had to tweak my pitch and throttle curves - this is always a brain puzzle and I think I am closer tot he correct settings for me for now.

I upped the gain on the Gy240 to about 40% and set the e-board TR pot to yes, about 40%. This was after playing a bit with 0/25, 25/25, 50/25.

Yes the Gy240 must have its REV switch ON - its Reversed.

The old fart that locks up the clubhouse at night kicked us out - but the last hover was really good! Just a very slight soft tail wag that I am sure I can dial out on the next pack!

Yes!!! So far I am pleased with the Gy240 and stock e-board working together.

Check out the pics of the installation - looks nice and neat, and I am glad I get to keep the stock e-board, and I am happy to be rid of the stock radio!
Attached Thumbnails Click image for larger version

Name:	Zx72279.jpg
Views:	41
Size:	92.1 KB
ID:	657989   Click image for larger version

Name:	Pk31090.jpg
Views:	28
Size:	95.4 KB
ID:	657990   Click image for larger version

Name:	Hm24331.jpg
Views:	41
Size:	91.2 KB
ID:	657991   Click image for larger version

Name:	Kd89220.jpg
Views:	29
Size:	86.9 KB
ID:	657992   Click image for larger version

Name:	Xj63471.jpg
Views:	31
Size:	75.4 KB
ID:	657993   Click image for larger version

Name:	Br12037.jpg
Views:	32
Size:	94.3 KB
ID:	657994   Click image for larger version

Name:	Fh80957.jpg
Views:	34
Size:	64.2 KB
ID:	657995