Hello, I am still new to glow engines and am having some tuning difficulties. I have am turning a Master Airscrew 10x6 prop. I use a OS A3 glow plug and I am using Cool Power fuel at 10% nitro. The engine is about 8 years old. I had a false start in the hobby. It has never been run till last month. I got it up and running fine b following advice in this forum. Here is the problem. It idles great and will transition to full throttle with no hesitation or sputtering. I have the WOT setting about 1/8 of a turn on the rich side. But at ¼ to ¾ throttle it will load up with fuel. While flying it will eventually flood out and quit. I have become very good at dead stick landings. If I open it up every so often it will clear out the extra fuel, but that is something I don’t want to have to do. Any suggestions would be appreciated. Most things I have read say I either have to compramise idle or WOT, or I am just stuck with what I get at mid throttle.