RCU Forums - View Single Post - axe cp thread
View Single Post
Old 04-24-2007 | 07:34 PM
  #769  
r/cheliman
Senior Member
 
Joined: Sep 2006
Posts: 163
Likes: 0
Received 0 Likes on 0 Posts
From: lindenhurst, NY
Default RE: axe cp thread

The problem eith my heli is definitly in the electronics. Took it out of the box again because I haven't gotten frustrated enough today so I figured what the hell. Flew great for the first five minutes. Then the tail started to drift, it was from the e-board because there was no wind and I had the tail dialed in to not move. After eight minutes I put her down and felt around. The e-board seemed to be fairly hot. Its about 75 so it took longer to warm up than it did the other day when it was 85. Once I started flying again it wabled and did the same thing it did the other day. Found the problem now have to solve it.

If I call tower or heli-max will they send me out a new one for free. I will be willing to pay shipping but that is it.

Happy flying, I was happier today that its not my sucky flying but electronics failler.