RCU Forums - View Single Post - Heading lock with 2-in-1 on BCP
Thread: Heading lock with 2-in-1 on BCP
View Single Post
Old 04-25-2007 | 09:38 AM
  #5  
LowKey3D's Avatar
LowKey3D
Senior Member
 
Joined: May 2002
Posts: 244
Likes: 0
Received 0 Likes on 0 Posts
From: Orlando, FL
Default RE: Heading lock with 2-in-1 on BCP
Yes, I'm setting up with the brushless main. I have a spare 5400kv brushless installed. Just bought the G90 gyro.
I'm going to use the pixie esc for the tail which I've converted to direct drive.. Once I get things functioning I'll
go to the Bell mixing setup on the head...
LowKey3D is offline  
Reply Like