Hey thanks for the warm recieption. These flybars do gain and lose pitch with the blades and have a form of "H" lever that operates them from the swash plate. There are two linkages involved that are both adjustable. I am going to see if they will work if I match them with the pitch gauge. Initially I just tracked them together before installing the new main rotor blades. Once tracked I installed the mains and tracked them as well. I just spun it up for the first time and that DID NOT work. I just found that I have a servo going to crap and am going to replace all three with a new set of JR's that I have so I will be starting all over with the rigging anyway. Hopefully that will give this thread enough time to get some more hits before I am back to the flybar stage.