Hey guys, I'm new to the 1/8 scale buggy and nitro in general. As such I have a couple of questions I was hoping some of you with more knowledge than myself might be able to help me with. First off the more Violator specific problems. I bought my Violator used on ebay and it didn't come with a clutch assembly so I had to by one at my LHS. When I finaly got it all assembled and mounted the engine, I couldn't get it to fit without it rubbing the rear brake disks. I can get it to fit directly between the two disks but it still rubs, especially with brake applied. Do I need a special flywheel or am I doing something wrong? I ordered the part number listed in the manual but it still is too big. My other question was regarding the dogbones. If I trim down the the a-arms to make it ROAR legal do I need to buy new ones or will the ones on there still fit? Any help you guys can give would be appreciated, I've only got about a million more questions!